Accessories

A Check Valve is installed in-line to protect the Regenerative Blower from unintended reverse flow of fluid back into your blower. Check Valves are particularly useful in applications involving diffusion of air into water, such as wastewater treatment, fish tank aeration, shrimp tank aeration, and oxygenation of any body of water.

A Pressure Filter Canister is an essential component to keep your Regenerative Blower operating optimally. It ensures that the blower has clean dry air entering the blower at all times. Keeping the bearings free of dirt and debris means that you blower will last a very long time without issues.

A Vacuum Filter Canister is used in vacuum applications which require particulates to be filtered out of the air-line, instead of filtering the ambient air being pulled into the blower.

A variable-frequency drive (VFD) is an accessory used to control the rotational speed of an alternating current (AC) electric motor. It does this by controlling the frequency of the electrical power supplied to the motor. With blowers, VFD's are best used with a 3 phase input to 3 phase output configuration.

An External Silencer will fit directly to the inlet and/or outlet of your Regenerative Blower and greatly reduce the noise level produced by the blower. An External Silencer creates almost zero restriction on the blower and allows the air to pass straight through.

Install a Relief Valve to ensure that your Regenerative Blower will operate safely. A Relief Valve is designed to let air in under excessive vacuum, or release air out if there is too much pressure in the piping. Make sure to set your Relief Valve so that the blower will continue to operate within its specified amp range, while also performing the necessary function.

NEMA 4X, prewired START/STOP 3 wire control with through-the-cover overload RESET. Single phase or 3 phase models available. Includes an adjustable trip current and selectable manual or automatic reset. Can be considered an on/off switch for your blower.

The Pressure Filter Element is the filter that fits our Pressure Filter Canisters. The standard filter elements come standard with 2 micron, paper filter media. We also have 5 micron polyester elements, as well as 0.3 micron HEPA elements available. Please call for pricing for polyester or HEPA elements.

The Vacuum Filter Element is the filter that fits our Vacuum Filter Canisters. The standard filter elements come standard with 2 micron, paper filter media. We also have 5 micron polyester elements, as well as 0.3 micron HEPA elements available. Please call for pricing for polyester or HEPA elements.